-40%

1PCS RA30H4047M1 400-470MHz 30W 12.5V, 2 Stage Amp. For MOBILE RADIO

$ 31.15

Availability: 10 in stock

Description

Part No.  :
RA30H4047M1
Description :
RoHS Compliance , 400-470MHz 30W 12.5V, 2 Stage Amp. For MOBILE RADIO
DESCRIPTION
The RA30H4047M1 is a 30-watt RF MOSFET Amplifier
Module for 12.5-volt mobile radios that operate in the 400- to
470-MHz range.
The battery can be connected directly to the drain of the
enhancement-mode MOSFET transistors. Without the gate
voltage (VGG=0V), only a small leakage current flows into the
drain and the nominal output signal (Pout=30W) attenuates up to
60 dB. The output power and the drain current increase as the
gate voltage increases. The output power and the drain current
increase substantially with the gate voltage around 0V(minimum).
The nominal output power becomes available at the state that
VGG is 4V (typical) and 5V (maximum).
At VGG=5V, the typical gate currents are 1mA.This module is
designed for non-linear FM modulation, but may also be used for
linear modulation by setting the drain quiescent current with the
gate voltage and controlling the output power with the input
power.
FEATURES
• Enhancement-Mode MOSFET Transistors
(IDD≅0 @ VDD=12.5V, VGG=0V)
• Pout>30W, ηT>42% @ VDD=12.5V, VGG=5V, Pin=50mW
• Broadband Frequency Range: 400-470MHz
• Metal shield structure that makes the improvements of spurious
radiation simple
• Low-Power Control Current IGG=1mA (typ) @ VGG=5V
• Module Size: 67 x 18 x 9.9 mm
• Linear operation is possible by setting the quiescent drain
current with the gate voltages and controlling the output power
with the input power.
RoHS COMPLIANCE
• RA30H4047M1 is a RoHS compliant product.
• RoHS compliance is indicate by the letter “G” after the Lot Marking.
• This product include the lead in the Glass of electronic parts and the
lead in electronic Ceramic parts.
However, it is applicable to the following exceptions of RoHS Directions.
1.Lead in the Glass of a cathode-ray tube, electronic parts, and
fluorescent tubes.
2.Lead in electronic Ceramic parts
Payment
We accept PayPal only.
All major credit cards are accepted through secure payment processor PayPal.
Payment must be received within 7 business days of auction closing.
We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Delivery details
Item will be shipped out within 48 hours upon receipt of your payment.
The shipping time details, please read the shipping and delivery together with the price.
We ship to your PayPal address. Please make sure your PayPal address is correct before you pay.
Considering the cost of business and easy shipping, usually the item is packed in retail packaging.
Terms of sale
All the products we are selling include factory warranty, don?t cover items that have been abused, burned and damaged in any form.
Please contact us via eBay Message if you have NOT received item in 30 days, we will check it with post office, and then resend or              refund any missing item.
In the unlikely event that your product is faulty in anyway, you must contact us ASAP and then return it within 7 days of receipt. The                  postage and packing fee will NOT be refunded.
We will not be responsible for the delivery or insurance charges incurred in returning item back to us.
If you return an item purchased from us, it must be back in Factory Condition. This includes packaging, inserts, manuals etc. please              allow us to 5 Working Days for us to process your returned item.
About us
If you have any questions, please fee free to email our service specialists 24 Hours a Day, 7 Days a Week.
We will reply you ASAP. If no response within 24 Hours, please check the spam in your mail box.
We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
Contact us
Pls contact us through ebay message or email
.