80W UHF RF Power Amplifier Amp XDT-UVPA70 Series For Two Way Radio Walkie Talkie

Description

Description
80W UHF RF Power Amplifier Amp XDT-UVPA70 Series For Two Way Radios Walkie Talkie
Introduction:
Applicable people: Self-driving tourists, project site commanders, radio players
Applicable objects: handheld radios, relay station, 433M remote control transmitter
Function: increase transmit power and expand communication range
Features:
1. Powerful 80W
2. 13.8V power supply, suitable for most cars
3. Temperature-controlled automatic fan
4. With receiving and sending automatic conversion
5. Minimum 0.2W drive
6. Compact size 100 * 70 * 60 mm
7. Small and light 400g
8. Durable shell made from 304 stainless steel
9. With input cable, output cable, and power cord
Product Parameters:
- Frequency range: 400MHZ-470MHZ
- Input power: 1-7W
- Output power: 80W
- Input voltage: 12-15V
- Input current: 15A
- Gain: 12dB-15dB
- Input & output connector: SMA-K
- Power supply connector: XT-30
- Product Size: 100 * 70 * 60 mm
- Weight: 400g
Package Included:
- 1 x RF Power Amplifier
- 1 x Input Cable SMA-J SMA-J
- 1 x Output Cable SMA-J M-K
- 1 x Power Cord XT-30 20cm
Instructions:
Accessories Introduction:
One power amplifier, one power cord, one output cable, one input cable
Appearance Introduction:
- Aluminum heat sink, 2pcs fans, fan grille protection, stainless steel shell, hexagonal screws, silicone feet, laser screen printing
- Small size, easy to carry, sturdy stainless steel housing, compact design
Interface Introduction:
- Input port, antenna port, power supply port, switch (gear selection), signal indicator has 4 grids
Introduction of Switch and Gears:
- Gear 1: magnify approximately 10 times, input 1W and output 10W; input 2W and output 20W, and so on.
- Gear 2: about 20 times magnification, input 1W and output 20W; input 2W and output 40W, and so on.
- Attention: When the power is high, the output power will be compressed. It means that it is not the input of 5W and then the output is 100W.
- OFF Gear: The power amplifier is in the through state, and the sending and receiving are not amplified.
Indicator Introduction:
- When it is on, it means that the power amplifier is in amplifying state;
- The more lights lit, the greater the input signal;
- Input power indication range, 1 light lit at 0.5W, 3W full mark, minimum 0.1W can be driven.
Introduction of Automatic Speed Regulation Fan:
At room temperature, the fan speed is very low and there is basically no sound. As the temperature of power amp increases, we can see that the speed of the fan is gradually increasing, about 800 rpm, and there is still no noise. After the power amplifier is full power for 5 minutes, the fan starts to run at full speed, and the speed is about 1800 rpm. If it does not transmit, after the temperature of the power amplifier drops, the fan speed will return to about 800 rpm.
Support Modes:
- Analog format: For NFM, AM
- Digital system: For P25, C4FM, NXDN, D-STAR
Wiring Test:
Get a handset radio, a power meter, connect the power cord, input cord, output cord, and then power on to test.
Applications:
1. When there is only a handset radio and high power is needed.
2. Digital handset radio require high-power and long-distance communication.
3. Self-driving team tour, on-site command, relay station.
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
On Dec-03-20 at 01:48:21 PST, seller added the following information: