AE TECHRON LVC 608 DUAL CHANNEL LINEAR POWER AMPLIFIER ****LOOK**** (REF.: 122G)

Description

SHIPPING COSTS ARE IN NO WAY INCLUDED IN THE PURCHASE PRICE.
WE SHIP TO CANADA, USA AND MANY OTHER COUNTRIES
We encourage you to read THE FOLLOWING !!!
Please ask us for a shipping quote if you are interested in this item since the displayed shipping cost is an indication and is not accurate. We are obliged by Ebay to indicate a flat rate to list on Ebay.com since we are in Canada
There may be customs and/or customs brokerage charges. These charges are not included in the shipping costs and might be requested at delivery.
Taxes need to be added to Canadian Buyers !!!
PAYMENT MUST BE RECEIVED WITHIN 3 DAYS OF AUCTION ENDING
AE TECHRON LVC 608
DUAL CHANNEL LIEAR POWER AMPLIFIER
UNIT IN GOOD CONDITION. 30 DAYS WARRANTY.
PLEASE SEE PICTURES !!!
AE TECHRON LVC 608
FEATURES
;
APPLICATION :
The
AE Techron LVC 608
is a general purpose, low power, linear power amplifier. It works best when driving loads of 4 ohms or higher. The LVC 608 works well with either pulsed or continuous test signals. The LVC 608 has two (2) separate channels that can be operated independently or combined for greater maximum voltage or current. R
each out to Select-Test.com for further assistance.
In Bridge-mono mode the available output voltage doubles. In Parallel-mono mode the amplifier operates with twice the available output current.
FEATURES:
·
Output of 8.0 amperes rms, or 45 volts rms, per channel depending on load.
·
Frequency bandwidth of DC to 20 kHz at full power.
·
Option of controlled voltage, or controlled current operation, modes changed via a jumper
·
User-adjustable voltage or current limiting
·
Remote switching to standby mode by contact closure
·
External monitoring of voltage and current output
·
Equipped with circuitry to protect the amplifier from input overloads, improper output connection (including shorts and improper loads), excessive temperature, voltage or current.
PERFORMANCE (One hour continuous ratings):
·
Frequency response
+/- 0.1 dB from 20 Hz to 20 kHz at 1 watt
·
Phase response
+/- 10 Degrees (10 Hz to 20 kHz at 1 watt
·
Signal-to-noise ratio
At 26 dB gain, better than 105 dB (A-weighted) below
full output
·
THD
Less than 0.05% from 20 Hz to 1 kHz increasing
linearly to 0.1% at 20 kHz at full output
·
I.M. Distortion
<0.05% from 410 milliwatts to full output at 26 dB gain
with and 8 ohm load
·
Slew rate
> 13V per microsecond
·
Load Impedance
Rated for 16,8,4 and 2 ohm use. Safe with all load types even reactive ones.
·
Input Impedance
Greater than 10K ohms, balanced, and 5K ohms
unbalanced.
·
Output impedance
Less than 10 milliohms in series with less than 2
Microhenries
PLEASE HAVE A LOOK AT THE OTHER LISTED ITEMS WE HAVE AVAILABLE ON  EBAY BY
CLICKING HERE
LOOK AT PICTURES!!!
WHAT YOU SEE IN THE PICTURE IS WHAT YOU WILL OBTAIN
UNITS MAY NOT BE CALIBRATED AND / OR MAY NOT HAVE RECENT CALIBRATION UNLESS NOTED.
BUYERS IN CANADA WILL BE SUBJECT TO GST AND PST DEPENDING ON THE PROVINCE
RESTRICTIONS ON SHIPPING APPLY TO INDONESIA, NIGERIA, IRAN, NORTH KOREA, IRAQ & AFGHANISTAN AT THIS TIME.
PLEASE NOTE WE CAN SHIP VIA YOUR CHOICE OF COURRIERS.
DO NOT BASE YOURSELF ON THE EBAY SHIPPING COST. IT USUALLY DOESN'T REFLECT REALITY.
DO NOT SEND MONEY UNTIL WE HAVE PROCEEDED TO CHECK OUT AND HAVE CALCULATED SHIPPING OURSELVES
THERE IS A .00 PACKAGING CHARGE ON ANY ITEM BEING SOLD FOR LESS THAN 0
You can use the following dimensions to get an idea of the shipping costs;
BOX SIZE
26 INCHES X 26 INCHES X 19 INCHES
Weight = 64 lbs
Unit to be shipped from Postal Code (equivalent of Zip Code): H1E 5Y8