Amplifier Research 60S1G3 Microwave Amplifier, 0.8 - 3 GHz, 60W (50S1G4A) Opt M1

Description

Amplifier Research 60S1G3 Microwave Amplifier, 0.8 - 3 GHz, 60W
*Contact Axiom Test Equipment to RENT this item*
DESCRIPTION
The Amplifier Research 60S1G3 is a solid state, self-contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. Housed in a stylish contemporary cabinet, the unit is designed for benchtop use, but can be removed from the cabinet for immediate equipment rack mounting.
The AR 60S1G3, when used with a sweep generator, will provide a minimum of 60 watts of RF power. Included is a front panel gain control which permits the operator to conveniently set the desired output level. The 60S1G3 is protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm. The RF amplifier stages are protected from over-temperature by removing the DC voltage to them if an over-temperature condition occurs due to cooling blockage or fan failure. There is a digital display on the front panel to indicate the operate status and fault conditions if an over-temperature or power supply fault has occurred. The unit can be returned to operate when the condition has been cleared. The 60S1G3 digital panel provides control of all amplifier functions both locally and remotely via IEEE-488 (GPIB) or RS-232 interfaces.
The low level of spurious signals and linearity of the Model 60S1G3 make it ideal for use as a driver amplifier in testing wireless and communication components and subsystems. It can be used as a test instrument covering multiple frequency bands and is suitable for a variety of communication technologies such as CDMA, W-CDMA, TDMA, GSM etc. It is also suitable for EMC Test applications where undistorted modulation envelopes are desired.
Specifications of the 60S1G3 Amplifier include:
RATED POWER OUTPUT: 60 watts minimum
INPUT FOR RATED OUTPUT: 1.0 milliwatt maximum
POWER OUTPUT @ 3dB COMPRESSSION:
Nominal: 70 watts
Minimum: 60 watts
POWER OUTPUT @ 1dB COMPRESSION
Nominal: 60 watts
Minimum: 50 watts
FLATNESS: ±1.5 dB typical (±2.0 dB maximum)
FREQUENCY RESPONSE: 0.8 - 3.0 GHz instantaneously
GAIN (at maximum setting): 48 dB minimum
GAIN ADJUSTMENT: (Continuous Range)
10 dB minimum (4096 steps remote)
INPUT IMPEDANCE: 50 ohms, VSWR 2.0:1 maximum
OUTPUT IMPEDANCE: 50 ohms, nominal
MISMATCH TOLERANCE: 100% of rated power without foldback. Will operate without damage or oscillation with any magnitude and phase of source and load impedance. (See Application Note #27)
MODULATION CAPABILITY: Will faithfully reproduce AM, FM, or pulse Modulation appearing on the input signal
THIRD ORDER INTERCEPT: See chart. The third order intercept points for this chart have been determined using two tones spaced 1 MHz apart. This is typical for W-CDMA systems. Closer tone spacing such as 60 kHz generally provides about a 1db to 3db improvement in the IP.
HARMONIC DISTORTION: Minus 20 dbc, max at 50 watts
SPURIOUS: Minus 73 dbc Typ.
PHASE LINEARITY: ± 1.0 deg/100 MHz, Typ
PRIMARY POWER: (Selected Automatically) 90-132, 180-264 VAC 50/60 Hz, single phase 600 watts maximum
CONNECTORS: Type N female
REMOTE INTERFACES
IEEE-488: 24 pin
RS-232: 9 pin Subminiature D
SAFETY INTERLOCK: 15 pin Subminiature D
COOLING: Forced air (self contained fans)
Notes and Included Options:
M1 - Rear Panel Output Connector
*
All of our equipment has been tested.  Additional Calibration may be available upon request!
~
Item sold with shown accessories, a power cord and manual on CD (when available)
~
PAYMENT AND SHIPPING INFO
Warranty Info & Return Policy
We
strive to exceed our customer's expectations
and maintain
100% Positive Feedback
.
Although we do not use eBay's automated Return Policy, a
ll goods or equipment sold by AxiomTest include
a
30-Day Warranty
which starts the day the equipment is shipped.
So contact us immediately if there is a discrepancy with your order or an equipment malfunction so we can issue a repair
, replacement, or refund
.
Returns must be shipped with all original packaging and accessories.  We will not accept any items with obvious signs of additional wear and tear or internal component alterations.  All of our items will ship with “Warranty Void” tamper resistant stickers. If any stickers have been removed or tampered with your refund will be canceled. Please include your RMA # on the packing slip, way bill, or package.
*CUSTOMER RESPONSIBLE FOR ANY AND ALL RETURN SHIPPING COSTS*
Payment Options
Domestic Buyers
- PayPal, Wire Transfer, Money Order, Company, Bank, or Personal Check.
International Buyers
: PayPal or Wire transfer only.
All funds must be in US Dollars.
Unsecured funds must clear prior to shipment.  Wire Transfers subject to a service fee.
Shipping
Unless noted otherwise, all shipments are done through FedEx. If you would like to utilize your own
shipping account please notify us PRIOR to checkout.
Saturday and Residential delivery may be available at an additional third party charge depending on the shipping method you choose.
We offer shipping outside of the United States.  However, some international laws prohibit us from shipping certain items to certain countries.  Additionally, not all countries are supported by our service provider.
You may also elect to use your own carrier, but we'll be responsible for providing the correct documentation and scheduling the pickup.  We are not set up to ship via USPS, and we will NOT falsify any import documents for international orders - no exceptions.
Please note: In all sales where an item is prohibited to ship internationally to a successful buyer, that buyer will be notified of non-shipment and a full refund will be made. We reserve the right not to ship any item internationally that is controlled by the US Department of Commerce’s laws and regulations and deemed non-shippable to that region of the world or to listed individuals.
eBay's International Shipping calculations do not include any additional duties, fees, or VAT that may be associated with importing this item into a foreign country - please bid accordingl
y
Sales Tax
California residents will be charged sales tax if no resale or tax exempt form is submitted prior to payment.
TRIED, TESTED...ACCEPTED.