-40%

Ball Screws & Actuators RH ball screw + nut, 5/8" dia., 8-1/2 inches long, used

$ 14.46

Availability: 100 in stock
  • Screw Length: 8-1/2
  • Brand: Ball Screws & Actuators
  • Type: Lead Screw
  • All returns accepted: ReturnsNotAccepted
  • Country/Region of Manufacture: Unknown
  • MPN: SR30-1-4114 and PR30-2-4114
  • Condition: This is used. No vendor packaging. A few minor blemishes from previous use. Some grease residue. May need cleaning and regreasing. This does include a Stainless flange attached to end of nut. But may have sealant on threads of nut so flange may be a pain to remove. The flange was custom made and not a Ball Screws part.

    Description

    Here is a Ball Screws & Actuators ball type lead screw with nut and flange. Print says the balls in nut are 440 C Stainless grade 2. This is R.H. with a .200 lead and the ball diameter is supposed to be .631, according to an old print I have. The total length is app 8-1/2 inches. The shaft on the one end is app .375 or 3/8". The shaft on other end is 3/8, then steps down to 1/4". The lead screw and nut are magnetic. Print calls for 303 Stainless. The nut is app 1" square and 1-3/4" long. The thread on the end of nut is supposed to be .937-16. From the print, the lead screw is p/n SR30-1-4114 and the nut is p/n PR30-2-4114. There is a Stainless flange attached to nut. There is thread sealant on the threads of the nut so removing the flange might be difficult. The last pic shows another ball screw with the flange removed. You will receive the ball screw with the flange attached. This is used. A few minor blemishes from previous use. Some grease residue. Could probably use a good cleaning and regreasing. No vendor packaging. The flange is custom made and not a Ball Screw part. Flange has a small thru hole, which would be used for a dowel pin when attaching to frame. For shipping, will wrap in bubble wrap. Free shipping via USPS Priority mail. If you have any questions, let me know. Thanks.