-40%
Compower PAM-118A Preamplifier 1 GHz to 18 GHz, 40 dB Gain, +12 dBm P-1
Compower PAM-118A Preamplifier 1 GHz to 18 GHz, 40 dB Gain, +12 dBm P-1
Compower PAM-118A Preamplifier 1 GHz to 18 GHz, 40 dB Gain, +12 dBm P-1
Compower PAM-118A Preamplifier 1 GHz to 18 GHz, 40 dB Gain, +12 dBm P-1
Compower PAM-118A Preamplifier 1 GHz to 18 GHz, 40 dB Gain, +12 dBm P-1
Compower PAM-118A Preamplifier 1 GHz to 18 GHz, 40 dB Gain, +12 dBm P-1
Compower PAM-118A Preamplifier 1 GHz to 18 GHz, 40 dB Gain, +12 dBm P-1

Compower PAM-118A Preamplifier 1 GHz to 18 GHz, 40 dB Gain, +12 dBm P-1

$ 237.57

Availability: 100 in stock
  • Brand: Compower
  • All returns accepted: ReturnsNotAccepted
  • MPN: PAM-118A
  • Condition: Unit is about 36dB gain and about 10dB on compression and does not meet the MFR's specifications. Sold as-is Please see pictures.

    Description

    This is a Surplus Auction
    See special considerations:
    This auction is for surplus inventory.
    All sales are final.
    These are excess units we have in inventory that we are looking to liquidate as we haven't the time or parts to service them. See the description to the right for more details.
    Auction Terms
    California Sales Tax applies to CA residents
    Personal or Company Check (will delay shipment until check clears)
    Certified Funds (Sameday shipment)
    PayPal ~ Online Payment Option
    Compower PAM-118A
    Preamplifier 1 GHz to 18 GHz, 40 dB Gain, +12 dBm P-1
    Serial No: 551059
    Unit is about 36dB gain and about 10dB on compression and does not meet the MFR's specifications. Sold as-is Please see pictures.
    Repair Determination:
    About 36dB gain and about 10dB on compression and does not meet the MFR's specifications
    Manufacturer Description:
    The PAM-118A is a wideband, high gain, bench top microwave preamplifier. The PAM-118A has a frequency range of 500 MHz to 18 GHz. This preamplifier is primarily intended for EMC applications; However, it may be used for other application that require low noise and high signal amplification.
    The front panel consists of two 50 Ohm matched precision N-connectors for input and output. The preamplifier is designed to have flat gain with minimal variation over the entire frequency range. The flat gain helps in taking fast adhoc readings during troubleshooting or R&D phase. The high gain and low noise figure of PAM-118A increases system sensitivity of effectively all measurement systems. It is very effective in measuring low level signals during Electromagnetic Interference (EMI) testing. It has low VSWR and high reverse isolation.
    Each preamplifier is individually calibrated using equipment traceable to National Institute of Standards and Technology. Individual data and certificate of calibration is shipped with each unit. The PAM-118A is battery powered to avoid any noise effects of power cables. It can also be powered by 15 VDC, 500 mA power adapter (provided with the unit).
    Features:
    Ultra Wideband - 500 MHz to 18 GHz
    High Gain - 40 dB (Typical)
    Flat Response - ± 2.5 dB
    Low Noise Figure - 3 dB max
    P
    out
    @ 1 dB Gain Compression - +12 dBm
    Battery Powered
    National Test Equipment, Inc.
    1935 Plaza Real Oceanside, CA 92056