CPI 700W KuBand TWTA VZU6997AC

Description

CPI 700W KuBand TWTA VZU6997AC . Condition is Used sold as is. No returns.
Unit in good working condition prior to removal. Relatively low beam hours and heater hours, low Helix current at full power.
Make an offer and shipping and pickup can be negotiated. Includes power cable. Do have a variety of waveguide components that can be bundled with if interested.
SPECIFICATIONS, VZU-6997ACElectricalFrequency 13.75 - 14.50 GHzOutput PowerTWT 700 W min. (58.45 dBm)Flange 603 W min. (57.80 dBm)Bandwidth 750 MHzGain 75 dB min. at rated power, 88 dB max.78 dB min. at small signal, 90 dB max.RF Level Adjust Range 0 to 20 dB (via PIN diode attenuator)Gain StabilityAt constant drive ±0.25 dB/24 hrs. maxand temperature (after 30 min. warmup)Over temperature, ±1.0 dB over oper. temp. range (typical)constant drive ±0.75 dB over ±10°C (typical)(any frequency)Small Signal Gain Slope ±0.04 dB/MHz max.Small Signal Gain Variation 1.0 dB pk-pk max. across any 80 MHz band2.5 dB pk-pk max. across the 750 MHz band4.5 dB pk-pk max. across the 750 MHzwith optional linearizerInput VSWR 1.3:1 max.Output VSWR 1.3:1 max.Load VSWRContinuous Operation 2.0:1Full spec. compliance 1.5:1Operation without damage Any valueResidual AM, max. -50 dBc below 10 kHz-20 [1.3+log F(kHz) dBc, 10 to 500 kHz-85 dBc above 500 kHzPhase NoiseIESS 308/309phase noise profile -6 dBAC fundamental related -36 dBcSum of spurs (370 Hz to 1 MHz) -47 dBcAM/PM Conversion 2.5°/dB max. for a single carrier at 8 dBbelow rated power. With optional integrallinearizer, improves to 1.0 deg/dB max.Harmonic Output -80 dBc at rated power,second and third harmonics.Noise & Spurious <-120 dBW/4 kHz, 12.2 to 12.7 GHz<- 65 dBW/4 kHz, 12.7 to 18.0 GHz<- 60 dBW/4 kHz, 12.7 to 18.0 GHz,with linearizer<-105 dBW/4 kHz, 18.0 to 26.0 GHz<-125 dBW/4 kHz, 26.0 to 40.0 GHzNoise Figure 10 dB max.; 15 dB max. with optionalintegral linearizerElectrical (continued)Intermodulation -23 dBc or better with two equalcarriers at total output powerlevel 7 dB (4 dB with optionalintegral linearizer) belowrated single carrier output.Group Delay 0.02 ns/MHz linear max.(in any 80 MHz band) 0.005 ns/MHz2 parabolic max.0.5 ns pk-pk ripple max.Primary PowerVoltage Single phase, 208-240 VAC±10%Frequency 47-63 HzPower Consumption 2.3 kVA typ. (small signal)2.8 kVA max.Power Factor 0.95 min.Inrush Current 200% max.EnvironmentalAmbient Temperature -10° to +50°C operating-40° to +70°C non-operatingRelative Humidity 95% non-condensingAltitude 10,000 ft. with standard adiabaticderating of 2°C/1000 ft. operating50,000 ft. non-operatingShock & Vibration Designed for normal transportationenvironment per Section 514.4MIL-STD-810E. Designed towithstand 20G at 11ms (1/2 sinepulse) in non-operating condition.MechanicalCooling Forced air w/integral blower. Rearair intake and exhaust. Maximumexternal pressure loss allowable:0.5 inches water column.RF Input Connection Type N femaleRF Output Connection WR-75 waveguide flange,grooved, threaded UNC 2B 6-32RF Output Monitor Type N femaleDimensions (W x H x D) 19 x 8.75 x 24 in.(483 x 222 x 610 mm)Weight 95 lbs (43 kg.) max.Heat and AcousticHeat Dissipation 2,000 Watts max.Acoustic Noise 65 dBA (as measured at 3 ft.)