-40%
RA30H0608M1 66-88MHz 2 Stage Amp For MOBILE RADIO Silicon RF Power Modules
$ 36.43
- Description
- Size Guide
Description
Part No. :RA30H0608M1
Description :
RoHS Compliance , 66-88MHz 30W 12.5V, 2 Stage Amp. For MOBILE RADIO
DESCRIPTION
The RA30H0608M1 is a 30-watt RF MOSFET Amplifier Module for
12.5-volt mobile radios that operate in the 66- to 88-MHz range.
The battery can be connected directly to the drain of the
enhancement-mode MOSFET transistors. Without the gate voltage
(VGG=0V), only a small leakage current flows into the drain and the RF input signal attenuates up to 60 dB. The output power and drain current increase as the gate voltage increases. With a gate voltage around
3V (minimum), output power and drain current increases substantially.
The nominal output power becomes available at 4V (typical) and 5V (maximum). At VGG=5V, the typical gate current is 1 mA.
This module is designed for non-linear FM modulation, but may also be used for linear modulation by setting the drain quiescent current with the gate voltage and controlling the output power with the input power.
FEATURES
• Enhancement-Mode MOSFET Transistors
(IDD0 @ VDD=12.5V, VGG=0V)
• Pout>30W, T>40% @ VDD=12.5V, VGG=5V, Pin=50mW
• Broadband Frequency Range: 66-88MHz
• Low-Power Control Current IGG=1mA (typ) at VGG=5V
• Module Size: 66 x 21 x 9.88 mm
• Linear operation is possible by setting the quiescent drain current with
the gate voltage and controlling the output power with the input power
RoHS COMPLIANCE
• RA30H0608M-101 is a RoHS compliant products.
• RoHS compliance is indicate by the letter “G” after the Lot Marking.
• This product include the lead in the Glass of electronic parts and the lead in
electronic Ceramic parts.
However, it is applicable to the following exceptions of RoHS Directions.
1.Lead in the Glass of a cathode-ray tube, electronic parts, and fluorescent
tubes.
2.Lead in electronic Ceramic parts.
Maker : MITSUBISHI
Payment
We accept PayPal only.
All major credit cards are accepted through secure payment processor PayPal.
Payment must be received within 7 business days of auction closing.
We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Delivery details
Item will be shipped out within 48 hours upon receipt of your payment.
The shipping time details, please read the shipping and delivery together with the price.
We ship to your PayPal address. Please make sure your PayPal address is correct before you pay.
Considering the cost of business and easy shipping, usually the item is packed in retail packaging.
Terms of sale
All the products we are selling include factory warranty, don?t cover items that have been abused, burned and damaged in any form.
Please contact us via eBay Message if you have NOT received item in 30 days, we will check it with post office, and then resend or refund any missing item.
In the unlikely event that your product is faulty in anyway, you must contact us ASAP and then return it within 7 days of receipt. The postage and packing fee will NOT be refunded.
We will not be responsible for the delivery or insurance charges incurred in returning item back to us.
If you return an item purchased from us, it must be back in Factory Condition. This includes packaging, inserts, manuals etc. please allow us to 5 Working Days for us to process your returned item.
About us
If you have any questions, please fee free to email our service specialists 24 Hours a Day, 7 Days a Week.
We will reply you ASAP. If no response within 24 Hours, please check the spam in your mail box.
We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
Contact us
Pls contact us through ebay message or email
.